Twin Tech offers Spray Paint under the brand name Evershine. Tough, durable, smooth professional finish every time. Prevent rust. Lead-free and 100% nontoxic when dry. Dries to touch in just 15 minutes! Maybe Handled in 30 minutes!
EVRSHINE SPRAY PAINT USES :
Evershine Spray Paint is great for furniture, metal and wood railings, fences, bicycles, hobbies, crafts, and metal garden accessories, cabinets, doors, patio items, wicket, tools, machinery parts, electrical panels and junction boxes, masonry, bulkheads, and thousands of other items.
SURFACE PREPARATION:
Evershine Spray Paint remove any grease, oil or dirt, wire brush, sand, or scrape surface to remove rust, chips, or flakes. Use 220 grit sandpaper on extremely slick surfaces. When the surface is thoroughly dry, wipe with a tack cloth.
BEST CONDITIONS :
Spray in a well-ventilated area. Use at temperatures between 50° and 85°C. For best results is thoroughly dry, wipe with a tack cloth.
APPLICATION OF SPRAY PAINT :
In order to get the best result shake vigorously for one minute so the agitator ball rattles freely inside the can. Shake occasionally during use. Test spray on an inconspicuous area. Hold can about 12” from the surface and spray in a sweeping motion.
Apply the paint in thin coats to avoid runs and drips. Apply the second coat within 60 minutes of applying the first coat for the best results.
CLOGGING:
Do not stick any sharp object into opening at top of can. If the spray nozzle becomes clogged, rotate quarter turn and back. If this fails, pull the nozzle off can run thumbnail the slit at end of the stem. Rinse in lacquer thinner.
STORAGE: Turn can upside down and press nozzle until only gas emerges.
DISPOSAL OF AEROSOL CAN: Do not puncture/crush or ignite the aerosol can which maybe containing some paint or propellant. Empty the contents of the aerosol can by ejecting out of the contents through the actuator valve of the aerosol can. The aerosol can may then be crushed and disposed of.
